SKU: 86932151483

Bomber CR, Trunnion, 205 x 65 mm - black

Sale price$136.83 Regular price$152.03
Save 10%

Pay in installments of $38.01 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 19 - Jul 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Bomber CR, Trunnion, 205 x 65 mm - blackDie Spiralfeder ist zurck, und zwar nicht nur fr Gravity Biker. Dank dem geschmeidigen Ansprechverhalten bei kleinen Unebenheiten sowie dem satten Hub fr ruppige Steinfelder und hohe Drops kannst du dich darauf verlassen, dass der Bomber CR mit Spiralfelder selbst auf den lngsten Abfahrten nichts von seiner auergewhnlichen Performance einbt. Egal ob du deinem alten Bike neues Leben einhauchen willst oder nach einem Dmpfer fr dein neu aufgebautes Bike

Die Spiralfeder ist zurück, und zwar nicht nur für Gravity-Biker. Dank dem geschmeidigen Ansprechverhalten bei kleinen Unebenheiten sowie dem satten Hub für ruppige Steinfelder und hohe Drops kannst du dich darauf verlassen, dass der Bomber CR mit Spiralfelder selbst auf den längsten Abfahrten nichts von seiner außergewöhnlichen Performance einbüßt. Egal ob du deinem alten Bike neues Leben einhauchen willst oder nach einem Dämpfer für dein neu aufgebautes Bike suchst, der Bomber CR ist deine wartungsarme, leistungsstarke Fahrwerkslösung mit einfach einstellbarer Spiralfeder.

Konstante Performance
Bekommst du mal wieder nicht genug und heizt durch den
Bikepark bis die Tore schließen? Der Bomber CR garantiert ein geschmeidiges und sattes Fahrgefühl, das auch bei langen Shredding-Sessions erhalten bleibt, und zwar unabhängig von schnellen Höhen- oder Temperaturschwankungen. Die perfekte Spiralfeder-Combo für deine Bomber 58, Z1 oder Z1 Coil Federgabel.

Starke Performance. Simple Konstruktion.
Die Bomber CR hat keinen Lockout oder sonstige Hebel und
überflüssige Rädchen. Für maximale Langlebigkeit und Einfachheit wurde bei diesem robusten Spiralfederdämpfer auf jeglichen Schnickschnack verzichtet. Vor der ersten Ausfahrt musst du nur noch Sag und Zugstufe einstellen und los geht‘s!

Der Bomber CR: Eine komplett neue Welt
Das geschmeidige Fahrgefühl einer Spiralfederung ist
schlichtweg unerreichbar. Weniger Dichtungen bedeuten weniger Reibung und ein geringeres Losbrechmoment. Dadurch spricht der Dämpfer sanft auf kleine Unebenheiten an und reagiert bei den größten Drops trotzdem satt und berechenbar. Neugierig, ob eine Spiralfeder für dich das Richtige ist? Suchst du nach einem zweiten Spiralfederbein als Backup oder als robustes Arbeitstier für den Ausflug in den Bikepark? Der Bomber CR ist dein erschwingliches Ticket, um wie auf Wolken über den Trail zu schweben.


Eigenschaften:

  • Standard: Trunnion
  • Dämpfergröße: 205 x 65 mm
  • 3 simple Verstellmöglichkeiten: Spiralfeder-Vorspannung, Lowspeed-Druckstufe und Zugstufendämpfung
  • Einmal eingestellt, garantiert er dauerhaft beste Fahrwerksperformance, geniale Fahrqualität und hohe Langlebigkeit
  • Erschwinglich, einfach einstellbar und, wie alle Produkte von Marzocchi, bombenstark

ACHTUNG: Dämpfer wird ohne Feder und Buchsen ausgeliefert. Diese müssen separat geordert werden.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 86932151483

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 10 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Michael A. Adkins
Lake Worth, US
★★★★★ 5
First Impressions - Complete Review
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer Review from an Artist. Printer cost with a 3-year extended warranty - $199.00. Came with four full bottles of Ink. Each bottle was huge, and enough to completely fill up the tanks. In my old Epson printer that used Epson 127 Ink Cartridges a cartridge held 8ml of ink. The cost per cartridge for the XL Black was $31.00 on Amazon. In comparison, a bottle of ink for the tank printer costs $15.00 and holds 65ml. The Epson 127 Ink Cartridge is rated at 175 pages for the XL cartridge and the Tank Printer is rated at 4500 pages per bottle of ink. So, the difference in cost is striking. Unboxing the printer was simple enough. The printer weighs about half the weight of my old Epson printer. The new printer does not have printer drawers but, back feed only. This actually worked out well for me since I was constantly taking the paper in out and out of the drawers when changing paper size. Also, with this direct paper feed, I figure it will handle my heavier weight card stock paper that I use for my art and greeting cards. To my great surprise, the printer offers two-sided printing. This is really handy when printing my Zines. The printer setup was extremely easy as they recommend a phone app, that walks you through each step with pictures. And it communicated perfectly with the phone for the setup. It takes about 15 minutes to completely set up the printer. I have learned to not rush setup. Take your time, and follow the instructions step by step, Which include filling the tanks. Features, * The printer dues Dual-Sided Print - Great for zines. * It has fax capability, but we do not have a landline, so that will not be used. * It does copying, with a document feeder or you can lift the feeder and place the document on the glass. * I mostly use my Epson Precision San copier but it is nice if you wish to make a quick copy of a document. * Some reviews complained about the very small LED display but I find that by using the app or computer I can control all that I need to do. Print Alignment. I did this test but the printer heads did not require any alignment. During the setup process, the program installs the printer driver on my computer. However I found it to be the very basic driver, and I went to the Epson Website and downloaded and installed the latest driver which is very robust and has all the settings that I needed. The printer's footprint is smaller than my old printer. And my old printer had two paper drawers, though I never used the second drawer. Negatives. The output tray is flimsy and seems like it would easily break if bumped when I walked past the printer, so I have to be careful about this. So far I do not see a way of checking the ink levels from the computer. And they said in the instructions to be sure to check your ink levels. You can see on the front of the printer, where you can see the ink levels. When you purchase more ink, you can attach the bottle and it will not overfill the tanks, and you can then use more ink from the bottle later. So I will purchase a complete set of ink and keep it and as it runs low with about 1/4 left in the tank, I will just fill it up. So far I am very happy with the investment and now printing and ink cost is not a major factor. And I figure I will do a lot of printing with this printer when the holiday season rolls around for my greeting cards. As for print quality, I will need to report on this later, though there were no negative reviews of print quality. A test print on regular paper and the colors seemed to be spot on. One note, I still will continue to use my Canon Pro-300 Wide Printer for my Fine Art Prints, but the new Tank Printer will be my studio workhorse.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2024
E
Verified Purchase
Edisson Salazar
Houston, US
★★★★★ 4
Frustrating to set up and unreliable
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I bought the Epson EcoTank ET-4800 hoping for an easy, low-cost printing solution, but it has been nothing but trouble. The wireless setup is overly complicated, and the printer often loses connection to the network, forcing me to restart it or reinstall the software. Printing is slow, even for simple documents, and the paper feeder sometimes pulls multiple sheets at once. While the EcoTank system is supposed to save money on ink, the print quality is inconsistent — colors can be dull, and black text occasionally appears streaky. Scanning and copying are also sluggish. For the price, I expected something much more reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025
I
Verified Purchase
Irving M. Lamansky
Natrona Heights, US
★★★★★ 5
ET-4800 EZ PZ set up and start up. Prints and scans just fine
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
An excellent home printer. And why did I purchase such? I had an Epson WF-520 for nearly ten years. But neglect and lack of use caused the printer head to get gunked up. I cleaned the print heads using a solution of 95% Etoh and glass cleaner (about fifty/fifty), a syringe with a plastic tube attached and LOTS of paper towel strips. It was moderately successful but I was never able to get it back to like new printing. I looked over several new printers and wanted to stay with Epson because of ease of use (copy, scanning, printing). Seems as tank printers are the way to go these days. So I ordered the ET-4800. Got here in only a couple of days. Setup was pretty easy, just follow the instructions either via the documentation included or online version. I have pinted and scanned a color test page. I used the built in SmartScan feature without having to think about it much. I am quite satisfied with the results. By the way, there is no automatic two side printing. You actually have to get off your b---, take out the first printing, turn it over and refeed the stack. I was used to doing that with the old WF-520 and never had a problem. I will now set up a once a week, automatic scheduled printing task. I will just have to make sure there is paper on hand. Lack of use is the killer of these inkjet machines regardless of manufacturer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026
T
Verified Purchase
Thomas Weaver
New York, US
★★★★★ 5
The intensity of the higher DPI and other settings makes this a marvelous Printer.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I am a former Canon product user for years. I became disappointed two printers ago. Support is horrible. So, I ordered this Epson. Initially, because of the differences I was somewhat confused on the set-up; however, once completed, I can completely endorse this product. The printing is absolutely tops. The ink system is fantastic. AND, it has fax capabilities which I tested and works great. Can not say enough good things about it. I specialize in historical photo and documentation restoration - and this printer works GREAT.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
D
Verified Purchase
Daniel G Forster
Waukegan, US
★★★★★ 3
It’s about support more than anything else !
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer worked great until it didn’t. Cleared a paper jam that kept giving an issue. Then it gave a scanner error, after paper jam was resolved. I called support; they gathered all my info. Transferred me to someone else who then told me she’d email me some numbers to call for deals on refurbished printers or onsite support. I ended ups solving the problem… I threw the printer in the trash, and will likely not buy anymore epson products. I was willing to pay for service but not waste more time and making more phone calls. I had a credit card; i was willing to use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 12, 2026

recommand products