Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 8 - Jul 13
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Thrustmaster TS-PC Racer Racing Wheel (Ferrari 488 Challenge Edition)270 to 1080 Rotations 2 x Paddle Shifters, 26 x Buttons 40W Motor 400W External Power Supply Compatible with Windows The Thrustmaster TS PC Racer Racing Wheel connects to Windows systems via USB to reproduce life like experiences of driving a virtual car in racing simulators. The TS PC Racer comes with a 40W motor that enables you to handle long stall curves or zigzag maneuvers. It features a closed wheel design with Alcantara grips and 270 to 1080
- 270 to 1080° Rotations
- 2 x Paddle Shifters, 26 x Buttons
- 40W Motor
- 400W External Power Supply
- Compatible with Windows
The Thrustmaster TS-PC Racer Racing Wheel connects to Windows systems via USB to reproduce life-like experiences of driving a virtual car in racing simulators. The TS-PC Racer comes with a 40W motor that enables you to handle long stall curves or zigzag maneuvers. It features a closed-wheel design with Alcantara grips and 270 to 1080° rotations. For quick access to menus, settings, and abilities, it is equipped with two directional D-pads, two rotary buttons, and eight actions buttons. To meet the needs of intense torque demands, Thrustmaster has outfitted the racing wheel with HallEffect AccuRate technology as well as a F.O.C. algorithm. With an included clamping system, you can secure the wheel to a table. In addition, powering this racing wheel is done with an external 400W power supply.
-
- Officially-licensed Ferrari 488 Challenge Edition inspired racing wheel
- Detachable 9:10 scale replica wheel with hand-stitched Alcantara wrapping
- Two black brushed anodized metal paddle shifters
- Two directional D-pads and two rotary buttons with push function
- Eight programmable buttons
- Built-in tachometer with 15 LEDs
- Mixed belt-pulley and gears system
- Internal memory and upgradeable firmware
- Internal motor provides 40W brushless FFB and velocity to offer stall and dynamic modes
- Motor cooling embedded system helps prevent overheating while remaining silent
- H.E.A.R.T (HallEffect AccuRate technology) provides 16-bit resolution (65,536 values), while the F.O.C. algorithm dynamically optimizes the response to intense torque demands
- 400W TURBO power supply delivers constant, peak power and features a toroidal-shaped, finless design to optimize efficiency versus heat at 86%
- Clamping system included
- Metal top cover
- 2nd-generation motor provides 50% more dynamics than the previous version (4 times greater stall force); Torque is 1.6 times higher than TX - T300 RS's torque
- Compatible on PC with user-supplied detachable Thrustmaster wheels, 3-pedal pedal set Thrustmaster T3PA, T3PA-PRO, and TH8A shifter (DB9 pedals T.RJ12 adapter required)
UPC: 663296420992
In the Box
Thrustmaster TS-PC Racer Racing Wheel (Ferrari 488 Challenge Edition)
Thrustmaster TS-PC Racer Ferrari 488 specs
| Host Interface | USB |
| Rotation Range | 270 to 1080° |
| Power | 400 W |
| Package Weight | 21.9 lb |
| Box Dimensions (LxWxH) | 21.0 x 15.0 x 13.0" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 1482 reviews
Sort
Product Reviews
★★★★★ 5
I love it!!
Style: Dual Arms, Size: 17"-33"
I love this product. I do a lot of gaming and you tube watching. At the same time a lot. With this I keep my desktop clear so I can have my notebooks there and can still have both my monitors up and running. Another plus is if I decide to sit on the couch and play the console I can turn the screen a full 180 degrees so I can setup you tube and play games on the T.V. using the console.
The product itself feels to be of decent quality. It is not all plastic. The clamp is nice and strong.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse.
I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down.
Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions.
The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall.
The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw.
The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable.
Top arms go on smoothly, cable routing is simple and easy. No complaints about this section.
Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way.
At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024
★★★★★ 5
Holds Backpack Straps Together
Size: 6inches-60PCS
Good quantity for its price. It’s a good quality and durable. I use it to hold my Loungefly backpack straps that I hang on my wall and it does its job perfectly. It’s reusable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
★★★★★ 5
Perfect for small normal cables lying around.
Size: 6inches-200PCS
Cable ties to organize my random cable is what I needed in my life. The quality is solid and it's easy to use and adjust. They hold well without slipping and the size is perfect for use with normal cables. its about 6 inches long so its gives you a little less than 3inch radius considering they way it is suppose to loop. I think realistically, its more like 2 inch radius. It is versatile and can be reused considering its velcro.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
★★★★★ 5
Perfect Velcro Cable Ties for Everyday Use!
Size: 6inches-60PCS
Great value for good quality Velcro cable ties! These are perfect for your electronic organizer bag or just to organize random loose cables around the house. Hard to tell how long they'll last, but for the price, they are easily replaceable. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
recommand products
Scuderia Ferrari Race Day Multifunction Black Round Dial Men's Watch - 830860
7371.00
SCUDERIA FERRARI GRAND TOUR Multifunction Blue Round Dial Men's Watch - 0830804
6277.50
SCUDERIA FERRARI ASPIRE Chronograph Blue Round Dial Men's Watch- 0830793
11677.50
Alien 摺疊式手挽袋 TS-00307
279.97
SCUDERIA FERRARI PRIMATO Mechanical Automatic Skeleton Black Round Dial Men's Watch - 0830442
20227.50