Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Catalytic Converter for 1998-1999 Chevrolet Camaro 5.7L MagnaFlow 23476Overview: Keep the check engine light off with MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 23476. With features including free flowing mandrel bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state of the art metrology department uses the latest 3D scanning systems during research and
Overview:
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23476. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.
This direct-fit catalytic converter is designed to fit the 1998-1999 Pontiac Firebird and 1998-1999 Chevrolet Camaro. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation.
Note : Not For Sale in California
| Brand | Interchange Part Number |
|---|
Application:
| Year | Make | Model | Submodel | Engine Size |
|---|---|---|---|---|
| 1998 - 1999 | Chevrolet | Camaro | 5.7L/V8 | |
| 1998 - 1999 | Pontiac | Firebird | 5.7L/V8 |
Specs:
| Body Material | Stainless Steel |
|---|---|
| Material | Stainless Steel |
| Overall Length (In.) | 43.7 |
| Series | HM Grade |
| Substrate Material | Ceramic |
| Air Tube Adaptable | No |
| Oxygen Sensor Location | Pre and Post Converter |
| Subtitle | Federal / EPA Compliant |
| Converter Quantity | 1 |
| Inlet Attachment | Bolt-On |
| Title | HM Grade Direct-Fit |
| Type | Direct-Fit |
| Finish | Stainless Steel |
| Main Piping Diameter | 2.25 |
| Clamp Included | Yes |
| Mounting Hardware Included | Yes |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 424 reviews
Sort
Product Reviews
★★★★★ 5
Great product!
Style: 30 sqft
I can say this product makes a huge difference with road noise and is cleaner and easy to work with when applying compared to other mats that cost about the same price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 14, 2026
★★★★★ 5
Very heavy and thick
Style: 30 sqft
I purchased mini brands of sound ending and this is by far the heaviest sound deadening I've ever ordered. I'm not installed yet but I have a good feeling that is going to work exceptionally in blocking sound. If weight is a concern for you I would recommend a lighter product however if sound quality and a quiet ride is your priority this is the one for you.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 18, 2026
★★★★★ 5
Siless Hybrid 3-in-1 - Far Exceeded my Expectations!!!
Model: SLH20025
I recently installed the Siless Hybrid 3-in-1 sound deadening mat in my vehicle, and I’m genuinely impressed. For just $80 for 25 square feet, this product delivers performance that rivals materials costing twice as much — and with far less hassle. If you're on the fence......Just buy it! You will not be disappointed.
Easy to Install: Unlike traditional sound deadening products that are stiff, sharp, and temperature-sensitive, this mat is soft, flexible, and easy to work with. I cut it cleanly with regular scissors and pressed it into tight spaces using just my fingers, so if in you don't have a roller or install tool, a good pair of scissors and your hands can get the job done. With other brands like Dynamat, the aluminum layer often leaves micro cuts on your hands and tears up your fingertips, but Siless does not due the acoustic layer being on top and above the aluminum layer that holds the butyl layer. So, it's very easy on your hands.
Even in cooler temperatures (around 50°F), I had no trouble applying it but it goes on better heated. If warm outside, I would leave the entire box out in the sun for at least 30 minutes when it's warm or heats it's very pliable and easy to mold. Make sure its where you want it because once applied it's not ever falling off. and it became even more pliable and easy to mold. No heat gun, no mess — just straightforward application.
I installed 40–50 square feet throughout the interior, covering everything except the headliner and the flooring forward of the rear seat. The difference in cabin noise is astonishing. I can turn my radio up concert loud with gut-punching bass, and from outside the car, it sounds like a factory sound system at mid volume. I was blown away by how well it contains sound — both inside out and outside in.
My exhaust is pretty aggressive and now is barely audible from inside the cabin. While driving, it almost sounds like a stock factory setup. The Siless matting actually changed the driving experience and feels refined.
If you're skeptical about sound deadening gimmicks, I get it, but this is the first product I've used and when I needed more, I went Stright to the 3 in 1 Hybrid matting and purchased it again. I love researching before buying and that's very uncommon for me to do.
Note: Proper installation is key, and it does take time and patience. But if installed correctly and in the right places, it works better previously used from paint-on sound deadening to Dynamat.
Update Nov, 2025
After using it this in 4 separate vehicles now. I feel the Siless’s 3 in 1 Hybrid has nailed it for best budget deadener that is better than dynamat extreme in performance and installation
Protip: buy a roll of 2-3” aluminum tape and tape the seams. After trimming the edges tend to very sticky between the panels. I ran a strip of aluminum tape over the seems to create a better seal and true moisture
I used it on four vehicles now and have I have not been paid to review and purchased every order myself.
3 in 1 Hybrid deadener by Siless is the best all around easy to apply sound deadner period!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 29, 2025
★★★★★ 5
Top quality
Model: SLH20025
This Siless Hybrid 3-in-1 sound deadening mat is easy to work with and feels high-quality. The butyl material is thick and pliable, making it simple to cut and fit into doors, floors, or panels.
After installation, road noise and vibrations are noticeably reduced, and it also seems to improve the overall cabin feel. No bad smell.
At 25 sq ft per roll, it’s a good value for anyone looking to dampen noise and improve car acoustics. Overall, a solid, effective option for automotive soundproofing. Used on a Fiesta ST.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2026
★★★★★ 5
Made a big improvement in cabin noise—highly recommend
Model: SLH20025
Siless Hybrid made a huge difference in reducing noise in the floor of my truck cabin. In some areas, there was basically just bare sheet metal between the inside and outside, so adding this really helped the truck feel more solid and noticeably quieter on the road.
I used Kilmat on the doors, and honestly I wish I had used Siless Hybrid there too, but it was too late by the time I realized the difference. This material is very sticky, easy to cut, and simple to apply, which made the install pretty smooth.
Just a heads-up: the tacky side gets messy and will bond to clothing really easily, so be careful during installation. Overall, I’d definitely buy it again—great product with real results.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2025
recommand products
DP501 - Zestaw klocków hamulcowych seria ULTIMAX2 EBC Brakes FIAT | Argenta | Croma | LANCIA | Dedra | Delta | Delta Integrale |
39.31
FWE TST-19 Mobile Slim-Line Heated Holding Cabinet, 13 Tray Slide Pairs, Stainless Steel
3481.20
Electric Dual-Cycle Rethermalizer-Holding Cabinet with Dutch Doors, 32-Basket / 192 Tray Capacity
8348.40
FWE P-Series Mobile Heated Banquet Cart for 96-120 Covered Plates, Single Door, Stainless Steel
2430.47
DP51493NDX - Zestaw klocków hamulcowych seria BLUESTUFF NDX EBC Brakes BMW | 1 Series (E81)(120) | 1 Series (E82 Coupe)(120) | 1
107.72