RKP 390

RKP 390RKP 390 CNC precision truck with a 260 mm wide hanger fits a dual 63100 setup with 15 mm wide HTD5M timing belts. The nominal baseplate angle is 45 degrees but can be adjusted to 35 54 degrees. Specs of the truck: Material: AL6061 T6Ride height: 58. 8 63. 8 mmWheelbase offset: approx. +1. 5 inchRake: 0 mmBushing seat diameter: 24. 6 mm and 2. 3 mm deep (dished)Total truck width: 390 mm Support dual 63100 motors with 15mm belts. The hanger has the same

RKP 390 CNC precision truck with a 260 mm wide hanger fits a dual 63100 setup with 15 mm wide HTD5M timing belts. The nominal baseplate angle is 45 degrees but can be adjusted to 35-54 degrees.

Specs of the truck:
Material: AL6061-T6
Ride height: 58.8-63.8 mm
Wheelbase offset: approx. +1.5 inch
Rake: 0 mm
Bushing seat diameter: 24.6 mm and 2.3 mm deep (dished)
Total truck width: 390 mm

Support dual 63100 motors with 15mm belts. The hanger has the same profile as Caliber II and works with all Caliber II baseplates on the market.

Off-the-shelf parts used:
– RipTide 96a pivot cup
– RipTide Krank Barrel 96a (back truck)
– RipTide Krank Barrel 90a (front truck)
– 2X socket cap screw

• 10mm straight axles: recommended for pneumatics
• Stepped 10-8 axles: recommend for urethane wheels(same with double kingpin trucks).

Specifications:

• Hanger Length: 260mm
• Overall Length: 390mm
• Weight: 405g per hanger with axles installed

Axles:

• 10mm Straight:
  • Axle Length: Axle Length: 56mm, (3/8″-24 Thread; 11mm length)
• 10-8 Stepped:
  • Axle Length: Axle Length: 60mm, (5/16″-24 Thread; 11mm length)

What’s Included:

• 2X 260mm Hanger
• 4X Axles
• 4X Lock nuts
• 2X adjustable baseplate(35-54 degrees)
• 2X CNC Precision Clamps

Note:

• When bought with our mounts,  a precision clamp will be sent together.
• Axles don’t come pre-installed for shipping reasons. please assemble with blue/red loctite.