Front Left Shock Absorber for Toyota Agya 1.0 1KR-VE (2020-2023) - KYB 3320029

Vehicle Fitment & Part Details

This KYB front left shock absorber (part number 3320029) fits the 2020-2023 Toyota Agya 1.0 with the 1KR-VE petrol engine (B100 body). Cross-referenced to Toyota OE 48510-BZ710, 48510-BZ860, and 48510-BZ860N. Verify VIN before ordering and pair with KYB 3320028 on the front right for balanced damping and handling.

Key Details

SKU

3320029

Brand

KYB

MPN

3320029

Component

Shock Absorber

Position

Front Left

Primary Fitment

Toyota Agya 1.0 1KR-VE B100 (2020-2023)

OE Reference

Toyota 48510-BZ710 / 48510-BZ860 / 48510-BZ860N

Paired Article

KYB 3320028 (front right counterpart)

Key Benefits

• KYB-manufactured front left shock absorber - Kayaba (KYB) is a long-standing Japanese OE supplier to Toyota and most major Asian manufacturers, trusted for consistent ride quality and long service life.
• Cross-referenced to three Toyota OE part numbers (48510-BZ710, 48510-BZ860, 48510-BZ860N) covering the 2020-2023 Agya production run and Toyota's progressive part revisions.
• Direct replacement for the factory-fitted front left shock absorber - no modification required.

Product Specifications

Vehicle Fitment

Fitment Notes

• Always verify the engine code (1KR-VE) and chassis (B100) match before ordering. Send us your VIN if verification is needed.
• The Toyota Agya launched in South Africa in late 2020 as Toyota SA's entry-level city car, replacing the Etios in the budget segment.
• Also sold in other markets as the Daihatsu Ayla and Perodua Axia - same platform, same 1KR-VE engine, same suspension geometry. If your vehicle has been serviced using Daihatsu or Perodua parts catalogues, Toyota OE 48510-BZ710 is the common cross-reference.
• The three Toyota OE numbers (48510-BZ710, 48510-BZ860, 48510-BZ860N) cover progressive factory part revisions during the Agya production run. KYB 3320029 matches all three.
• Shock absorbers should always be replaced as a pair across the same axle. Fit KYB 3320028 on the front right at the same time as this front left unit for balanced damping and predictable handling.

Installation / Use / Maintenance Tips

• Compare the new shock absorber to the removed unit before installation - confirm length, top mounting type, bottom fitting type, and piston rod diameter match.
• Inspect the top mount, bump stop, dust boot, lower mounting bushes, and coil spring condition before fitting the new shock absorber. Replace worn supporting components at the same time.
• Always replace both front shock absorbers at the same time - a worn shock on one side means the paired unit on the other side is at a similar wear stage. Fitting one new shock alongside a worn one produces unbalanced handling.
• Prime the shock absorber by extending and compressing it several times by hand before installation. Hold it vertically with the piston rod uppermost between cycles to bleed any air from the internal chambers.
• Torque all mounting hardware to the Toyota workshop specification in the correct sequence.
• Check wheel alignment after installation - shock replacement often reveals or aggravates existing alignment issues.
• Test drive gently for the first few kilometres. Listen for unusual noises, check for pulling or uneven handling, and return for any follow-up work needed.

Common Questions

Will this fit my Toyota Agya?
Yes, provided your vehicle is a 2020-2023 Toyota Agya with the 1KR-VE engine and B100 chassis. Verify your VIN and engine code before ordering.

Is KYB a good brand?
KYB (Kayaba) is a long-established Japanese suspension manufacturer and is a factory original-equipment supplier to Toyota and several other Asian vehicle manufacturers. KYB shock absorbers are widely used as direct OE-quality replacements worldwide and carry a strong reputation for consistency and service life.

Is this for the left or right side?
This is the front left shock absorber. Order KYB SKU 3320028 for the front right side to complete a full axle pair - shock absorbers should always be replaced together across the same axle.

Do I need a front right one too?
Yes, in almost all cases. A worn shock absorber on one side means the paired shock on the other side is at a similar wear stage and should be replaced to preserve balanced damping and predictable handling. Order KYB SKU 3320028 for the front right side.

What's the difference between 48510-BZ710, 48510-BZ860 and 48510-BZ860N?
These are progressive Toyota OE part revisions for the 2020-2023 Agya front shock absorber. Toyota updated the part specification during the production run, and the "N" suffix typically indicates a revised (new production) version with minor updates. KYB 3320029 matches all three revisions - the shock absorber is compatible with your Agya regardless of which OE number was originally fitted.

What is the 1KR-VE engine?
1KR-VE is Toyota's 1.0 L 3-cylinder petrol engine with VVT-i variable valve timing, used in the Agya and other Toyota small cars. It also powers the Daihatsu Ayla and Perodua Axia in other markets.

How do I confirm fitment?
Check your vehicle's engine code (stamped on the cylinder block and listed on your VIN plate) reads 1KR-VE, and that your Agya was manufactured 2020-2023. Send us your VIN for verification if needed.